TWI Insulating Paint

Description

TWI Insulating Paint is an acrylic emulsion resin, methyl acrylate and water-based paint, produced in line with modern European technology, which becomes fully moisture resistant when dried. Indi TWI is harmless to humans and the environment due to the fact that it is water based. When the first layer is applied, TWI Insulating Paint turns into an elastic surface, which is highly resistant to shrinkage, expansion and temperature changes. TWI Insulating Paint penetrates into the concrete surface cracks and insulates concrete layers.

Functions

Insulating, waterproofing and coloring concrete and cement surfaces

TWI Insulating Paint

Typical Uses

  • Insulating and coloring cement and concrete facades (white insulator)
  • Moisture insulation of roof, garage and parking floor, kitchen, toilet and bathroom
  • A suitable alternative for bituminous roofing and waterproofing materials.

Advantages

  • Washability
  • Anti-moss and anti-alga
  • Optimum penetration and adhesion
  • Resistant to cold and heat
  • Highly resistant to structural expansion and shrinkage
  • Resistant to UV radiation and humidity and acid rains
  • Elasticity and flexibility
  • Fast, easy and uniform application and Easy restoration
  • Cost effective and optimum coverage rate

Technical Features

  • Color: White
  • Base: Water
  • Resin Type: Elastomeric Acrylic
  • Finish: Semi-mate
  • Number of Components: Single Component
  • Density: 1.2 ±0.1 g/cm3
  • Surface Drying Time: Minimum 1 hour
  • Full Drying Time: Minimum 6 hours
  • Time Required to Achieve Water Resistance:
  • Minimum 24 hours

Mechanical and Temperature Properties

Compressive Strength 16 Mpa
Tensile Strength 12 Mpa
Bending Strength 6 Mpa
Hardness 60 shor A
Impact Resistance 4 Kj/m
Adhesion Resistance 14 Mpa
Heat Resistance -50 to +180
Flammability 0%
UV Resistance 100%

Coverage

  ⦁ Coverage Surface per Kilogram: 1-2 Square Meter, Depending on Thickness Level

Implementation Method

  ✔ Surface Preparation

1. Clean the desired surface from soil, grease or grits
2. Clean the desired surface from loose layers
3. Repair the deep surface cracks, joints with suitable wall putty
4. Fillet all the corners, edges and quoins

  ✔ Implementation in Two Layers

Preliminary layer: A layer of TWI Primer is firstly applied on the surface to achieve high performance quality.
First Layer (Penetrating Layer): Dilute TWI Insulating paint with water with the ratio of 20%, and apply on the whole surface.
Second Layer (Coating Layer): Eight hours after the first penetrating layer, a dense layer of TWI Insulating Paint should be applied on the surface. When applying TWI Insulating Paint on horizontal surfaces, special fibers (tissues) can be used between the two layers.

Note: Contact our technical unit for information on proper implementation methods under different project conditions.

Application of TWI Insulating Paint

  • TWI Slide

    TWI Slide

  • TWI Slide

    TWI Slide

  • TWI Slide

    TWI Slide

Download TWI Insulating Paint Technical Data Sheet in PDF Format

Download TWI Insulating Paint Technical Data Sheet

Implementation Tools

✔ Paint Brush, Roller.
Paint Brush Roller

Package

  • 10 kg Container